Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 14 Current »

Document Revision 2.00

 

The Settings tab supports the configuration of various ad tag parameters.

 
CAUTION
Do not navigate to another tab (or log out) until you have saved your changes. Otherwise, they will be lost.

Ad Tag Configurations

  1. Navigate to Setup --> Settings.
  2. The following screen will display.
  3. Modify the settings as needed.
    1. Default to Secure Ad Tag (HTTPS):  This option controls the default setting of the Secure Ad Tag field (in the IMPLEMENTATION AND CODE section ) when you create a new ad tag, and modify an existing ad tag. A value of On indicates you wish to set the default to secure all tags via HTTPS protocol.
      > This setting is recommended for ads originating from secure environments.
      > To default to Secure Ad Tag (HTTPS), click Off, per the toggle shown below. The displayed value indicates the current setting.

       
       

      HINT
      To turn off defaulting to Secure Ad Tag, click On, per the toggle shown below. The displayed value indicates the current setting.
        
  4. Review your settings and make any necessary corrections.
  5. If you made a mistake and need to back out your changes, click  at the top of the screen. (Scroll up if you do not see this button.)
  6. Otherwise, click  at the top of the screen. (Scroll up if you do not see this button.)
     
  • No labels